D3 Dimmer
The D3 Dimmer was designed to provide exceptional power and flexibility in a low voltage DC control unit. The D3 Dimmer can be configured as three separate 10A dimmers, two 15A dimmers, or one 30A dimmer. It will operate with any DC voltage between 9-24VDC and can be used with batteries or with mains-powered DC power supplies to control 3 channels of LEDs, Incandescent lamps, effects, or any other device that runs on 9-24V DC power. The 3 channel configuration is ideal for controlling RGB LED systems. Each dimmer channel can be separately configured with any of four different output profiles, including ISL curve dimming (for incandescent loads), linear dimming, LED dimming with five TV/Film Modes, and six smoothing options, or Non-Dim operation. The unit may be configured either locally via the Button pad and LCD user interface, or via RDM.
City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers. These connectors require a special crimping tool.
D3 Dimmer Features
NEMA 1 enclosure, Aluminum, and Steel
Accessory Mounting Plate for panel or pipe mounting included
User Interface:
(5) Control Pushbuttons: Back, Forward, Up, Down, Enter
16 character x 2 row LCD display, Monochrome, Backlit
Recessed Reset pushbutton
DMX/RDM termination switch
Connections:
XLR5PM for DMX/RDM input, XLR5PF for DMX/RDM pass-thru
(8) 45A Anderson Powerpole connectors as 1 x 2P set Dimmer Power IN and 3 x 2P sets as Dimmer Outputs
Individually controllable via DMX or RDM
4 selectable output formats
ISL (incandescent) dimming curve
Linear (incandescent) dimming curve
LED dimming curve with five TV/Film Modes and six smoothing options
Non-Dim
Configuration Options
Dimmer Personality (configure with 1, 2 or 3 DMX Addresses)
DMX Start Address
ISL, Linear, ND, or LED Dimmer (settable separately for each)
RDM Functions
RDM Discovery
Identification
DMX Addressing
Configuration
Battery Voltage
Device Label
Data Loss Timeout
Test Level
Output Format
The D3 Dimmer was designed to provide exceptional power and flexibility in a low voltage DC control unit. The D3 Dimmer can be configured as three separate 10A dimmers, two 15A dimmers, or one 30A dimmer. It will operate with any DC voltage between 9-24VDC and can be used with batteries or with mains-powered DC power supplies to control 3 channels of LEDs, Incandescent lamps, effects, or any other device that runs on 9-24V DC power. The 3 channel configuration is ideal for controlling RGB LED systems. Each dimmer channel can be separately configured with any of four different output profiles, including ISL curve dimming (for incandescent loads), linear dimming, LED dimming with five TV/Film Modes, and six smoothing options, or Non-Dim operation. The unit may be configured either locally via the Button pad and LCD user interface, or via RDM.
City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers. These connectors require a special crimping tool.
D3 Dimmer Features
NEMA 1 enclosure, Aluminum, and Steel
Accessory Mounting Plate for panel or pipe mounting included
User Interface:
(5) Control Pushbuttons: Back, Forward, Up, Down, Enter
16 character x 2 row LCD display, Monochrome, Backlit
Recessed Reset pushbutton
DMX/RDM termination switch
Connections:
XLR5PM for DMX/RDM input, XLR5PF for DMX/RDM pass-thru
(8) 45A Anderson Powerpole connectors as 1 x 2P set Dimmer Power IN and 3 x 2P sets as Dimmer Outputs
Individually controllable via DMX or RDM
4 selectable output formats
ISL (incandescent) dimming curve
Linear (incandescent) dimming curve
LED dimming curve with five TV/Film Modes and six smoothing options
Non-Dim
Configuration Options
Dimmer Personality (configure with 1, 2 or 3 DMX Addresses)
DMX Start Address
ISL, Linear, ND, or LED Dimmer (settable separately for each)
RDM Functions
RDM Discovery
Identification
DMX Addressing
Configuration
Battery Voltage
Device Label
Data Loss Timeout
Test Level
Output Format
The D3 Dimmer was designed to provide exceptional power and flexibility in a low voltage DC control unit. The D3 Dimmer can be configured as three separate 10A dimmers, two 15A dimmers, or one 30A dimmer. It will operate with any DC voltage between 9-24VDC and can be used with batteries or with mains-powered DC power supplies to control 3 channels of LEDs, Incandescent lamps, effects, or any other device that runs on 9-24V DC power. The 3 channel configuration is ideal for controlling RGB LED systems. Each dimmer channel can be separately configured with any of four different output profiles, including ISL curve dimming (for incandescent loads), linear dimming, LED dimming with five TV/Film Modes, and six smoothing options, or Non-Dim operation. The unit may be configured either locally via the Button pad and LCD user interface, or via RDM.
City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers. These connectors require a special crimping tool.
D3 Dimmer Features
NEMA 1 enclosure, Aluminum, and Steel
Accessory Mounting Plate for panel or pipe mounting included
User Interface:
(5) Control Pushbuttons: Back, Forward, Up, Down, Enter
16 character x 2 row LCD display, Monochrome, Backlit
Recessed Reset pushbutton
DMX/RDM termination switch
Connections:
XLR5PM for DMX/RDM input, XLR5PF for DMX/RDM pass-thru
(8) 45A Anderson Powerpole connectors as 1 x 2P set Dimmer Power IN and 3 x 2P sets as Dimmer Outputs
Individually controllable via DMX or RDM
4 selectable output formats
ISL (incandescent) dimming curve
Linear (incandescent) dimming curve
LED dimming curve with five TV/Film Modes and six smoothing options
Non-Dim
Configuration Options
Dimmer Personality (configure with 1, 2 or 3 DMX Addresses)
DMX Start Address
ISL, Linear, ND, or LED Dimmer (settable separately for each)
RDM Functions
RDM Discovery
Identification
DMX Addressing
Configuration
Battery Voltage
Device Label
Data Loss Timeout
Test Level
Output Format